Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Pineapple finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Pineapple finial measures 1-1/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Pineapple finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Pineapple finial measures 1-1/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Pineapple finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Pineapple finial measures 1-1/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Pineapple finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Pineapple finial measures 1-1/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Round finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Round finial measures 3/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Round finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Round finial measures 3/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Round finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Round finial measures 3/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Round finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Round finial measures 3/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Urn finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Urn finial measures 1-1/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.

Tube Length: 28.5", 36" or 48"

Each set includes one 3/8” diameter durable electroplated steel tube, two electroplated end brackets with Urn finials, and installation screws finished to match. All parts are lacquer coated to resist tarnishing. The tube slides into each bracket about ½” so please specify a tube length that is at least 1-1/2” longer than the width of your runner to accommodate the brackets and a little extra space. The tubes can easily be cut to a shorter length with a metal cutting hacksaw during installation. Each Urn finial measures 1-1/4” long and is attached to the outside surface of the brackets. One Zorrods Standard Stair Rod Set is installed on each step where the tread meets the riser and an additional one is usually used on the bottom riser where it meets the floor. The bracket projects 1-1/4” and the tube projects ¾” from the riser. Stair rods are not a form of carpet installation. Another means of installation must be used.